SP100 WATER SAMPLER       
Portable, Rugged, Push-Button Water Samplers

Product Description

The portable water sampler is ideal for removing samples from shallow wells and surface water sources, including lakes, ponds, and holding pools.  The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance.  The water samplers are designed to take a manual sample and they have the ability to back flush the sample hose once a sample has been taken.

Power

The SP100 water sampler includes an internal 5AH 12V DC rechargeable gel cell battery that will power the water sampler to pump approximately 150 litres (40 gallons) between rechargings.  A battery charger is included with the unit and will recharge the battery within 12 hours.

Sampling

To provide high sample integrity, the water sample never comes in contact with any water sampler components other than the norprene and polyethylene tubing.  The tubing is easy to clean and replaced.  To avoid cross-contamination or lengthy decontamination procedures, simply change the inexpensive tubing between samples.

Specifications

Enclosure: Expanded UV protected PVC (9" x 7.5" x 4.5")
Weight: 6lb (Shipping Weight 7lb)
Operating Temperature: 0-70°C

Sample Pump:
Flow Rate: 1000 ml per minute at 4 ft. head
Type: Peristaltic
Maximum Lift: 22'
Pump Tube: Norprene 1/4" ID
Sample Hose: 15' nylon reinforced 1/4" ID polyethylene flexible tubing section with intake strainer.  Hose may be extended, as required, using standard 1/4" tubing and fittings.

Battery: Rechargeable 5 AH Gel Cell
Battery Life: The battery will power the sampler for approximately 2 1/2 hours of continuous sampling.

Options & Prices