SS201 STORMWATER SAMPLER
Automated
Stormwater Sampler for Discrete & Composite Sampling
|
|
On this page:
|
Downloads (PDF):
*May take several minutes to
download, depending on your internet connection
speed.
|
Additional Information:
- Global Water's Samplers
- Sampling Article
- Product Support
|
|
The Global Stormwater Sampler is designed specifically
to meet many stormwater sampling requirements. The
storm water sampler takes a "first flush" or discrete
sample in one bottle and a "time weighted" composite
sample in a second bottle. The SS201 functions as two
stormwater samplers in one: it consists of two intake
tubes, two peristaltic water sampling pumps, and two
water sample bottles, thus eliminating any possibility
of cross contamination between the discrete and the
composite sample. The Global Storm Water Sampler is
easily set up and installed in any stormwater channel
to take and store physical water samples throughout
storm events. Everything you need is provided for a
successful stormwater management sampling program.
The Global Stormwater Sampler consists of the
following features:
 |
a
rugged, rainproof, lockable carrying enclosure
|
|
two 4,000 ml polyethylene sample bottles for first
flush and composite samples
|
|
two peristaltic water sampler pumps
|
|
a
control panel enclosed logic timer/controller
|
|
two 15' nylon sample pickup hoses with removable
debris strainers
|
|
a
water sensor with 15' cable
|
|
a
5 AH rechargeable gel cell battery
|
|
a
battery charger
|
|
and, a rain gauge that automatically drains once
every 24 hours (with mounting screws).
|
A water sensor controls each of the storm water
samplers. The water sensor can be used to trigger a
sample based on a preset rainfall accumulation (by
positioning it in the included rain gauge) or raised
water level in a storm drain.
Total rainfall for storm events can be measured by the
rain gauge. Both sample bottles are equipped with
float switches that automatically turn off the sampler
pumps if the bottles become full.
The sampler is not damaged by water or moisture or
severe environmental conditions. All of its parts may
be washed with soap and water.
|
Sample Size:
First Flush: 4000 ml; Composite: 200 ml at 10 minute
intervals, or set by user (4000 ml composite sample
maximum)
Size: 9"L X
17"W X 22"H
Weight: 22lb
(Shipping Weight 24lb)
Operating Temperature:
0-70°C
Battery Life:
The battery will power the sampler for a minimum of
four months including five 24-hr. storm events before
recharging is required.
Materials
Enclosure:
Expanded UV protected by PVC
Bottles:
4000
ml polyethylene
Sample Tubing:
Polyethylene
Logic
Timer/Controller:
CMOS Solid State (fully potted in epoxy)
Water Level
Sensor:
Solid State with a 15' cable.
Sample Hoses:
Two 15' nylon reinforced 1/4" ID polyethylene flexible
tubing sections with intake strainers. Hoses may be
extended, as required, using standard 1/4" tubing and
fittings.
Battery:
Rechargeable 5 AH Gel Cell
Sampling Pumps
Flow Rate:
1000 ml per minute at 4 ft. head
Type:
Peristaltic
Maximum Lift:
22'
|
SS201 Stormwater
Sampler
Includes the following parts: a rugged, rainproof,
and lockable carrying enclosure; two 4,000 ml
polyethylene sample bottle for first flush and
composite samples; two peristaltic sampling pumps;
a control panel enclosed logic timer/controller; a
water sensor with 15' of cable; a rechargeable 5
AH gel cell battery and battery charger; two 15'
long sample pickup hoses with removable debris
strainers; and a rain gauge that automatically
drains every 24 hours.
|
$1045
|
|
SMPL-LOG2 Dual Pump Water
Sampler Datalogging Option
Records both pumps
when the sampler triggers. The user can download
data via Palm Pilot or laptop. Includes dual
pulse channel datalogger with software and cables.
|
$460
|
|
SMPL-4TD 4-hour Adjustable
Event Time Delay Option
Delay your sample
for up to 4 hours from the actual trigger event.
Meet your compliance requirements without effort.
|
$295
|
|
RELATED PRODUCTS
|
WS300 Composite Sampler
Composite sampler with a 2.5 gallon bottle.
Refrigerated options available.
|
$1045
|
|
SS505 Stormwater Sampler
Discrete sampler with a one litre sample bottle.
|
$945
|
|
RG333 Auto Drain Rain Gauge
Free with purchase of SS201 Stormwater Sampler.
|
$160
|
|
WQ900 Water Pollution Testing Kit
|
$495
|
|
SIT60 Satellite Internet Telemetry
Replace the datalogger on your stormwater sampler
with a telemetry system that pages you or alerts
you via text messaging that your sampler was
triggered.
|
$1,495
|
|
REPLACEMENT PARTS
|
00-010 12V 5AH Rechargeable
Battery.....................$
30
FE0400 Battery Charger (120VAC to
12VDC)...............$
15
00-546 Pickup
Hose................................................$
1.50/ft
CA0300 Pickup
Strainer............................................$
45
00-744 Peristaltic Pump
Tubing...............................$
5.25/ft
00-418 Sample Bottle,
Plastic..................................$
15
CB0400 Rain
Sensor.................................................$
42
CB0200 Float
Switch.................................................$
25
CH0000 Auto Drain Rain
Gauge..................................$160
|
|
|
