Environmental Catalogue

BACK TO CATALOGUE

SS505 Discrete Stormwater

Sampler 1 Litre

 

SS505 DISCRETE SAMPLER
Automated Stormwater Sampler

Automated Stormwater Sampler

FEATURES:

bullet

Easy to operate – no programming required

bullet

Meets state and federal stormwater regulations

bullet

Rugged, lightweight, and easy to install

bullet

Auto-drain rain gauge resets daily

bullet

Battery will power the sampler for several months and/or storm events before requiring charging

bullet

Peristaltic pump eliminates sample contamination

bullet

Easily secured against theft

bullet

Not damaged by water, moisture, or severe conditions (all circuits are epoxy-coated for moisture protection)

bullet

Sample bottle is equipped to automatically prevent overflow

bullet

Reliable and easy stormwater sampling based on rainfall and/or water level

bullet

Options for larger and composite samples

 

 

On this page:

- Product Description
- Specifications
- Options & Prices

Downloads (PDF):

- Quick Reference Sheet
- Discrete Sampler Manual*

*May take several minutes to download, depending on your internet connection speed.

Additional Information:

- Global Water's Samplers
- Sampling Article
- Product Support

Product Description 

Global Water's SS505 Stormwater Sampler is designed specifically to meet federal and state storm water sampling requirements.  The Stormwater Sampler takes a discrete sample, filling the one liter sample bottle, based on rainfall and/or water level.  The SS505 can be easily installed and set up in any storm water channel to take and store water samples during a storm event.

The Global Stormwater Sampler consists of a rugged, rainproof, and lockable carrying enclosure.  Inside the enclosure is a 1.0 liter polyethylene sample bottle, a peristaltic sampling pump, a logic timer/controller, and a rechargeable 5 Ah gel cell battery.  Also provided is the auto-drain rain gauge, sampler pickup hose and a battery charger.  Everything you need is provided for a successful sampling program.  Electronic circuits are fully encapsulated in epoxy, which eliminates failure due to moisture.

The SS505 Stormwater Sampler also includes two water sensors.  One water sensor can be used with the included auto-drain rain gauge to sample at a specified rainfall total.  The other sensor can be used to start the sampler when water flow through a channel reaches a specific point or height in the channel.  The sampler can be configured so either or both sensors will start the sampler.

The auto-drain rain gauge drains the water in the rain gauge every 24 hours so that sampling is based on daily rainfall.

 

Automated Stormwater Sampler

Automated Stormwater Sampler

Specifications

Sample Size:  First Flush, 1 L polyethylene bottle
Size:  7"L x 13"W x 17"H
Operating Temperature:  0-70°C
Weight:  15 lb (Shipping Weight 17 lb)

Materials

Enclosure:  Expanded UV protected PVC
Bottle:  1 Liter
Sample Hose:  Polyethylene
Sample Hose:  15' Nylon Reinforced 1/4" ID polyethylene flexible tubing
Water Level Sensors:  Solid state with a 15' cable
Battery:  Rechargeable 12V 5AH Gel Cell

Sample Pump

Flow rate:  1,000 ml per minute at 4 feet head
Maximum lift:  22 feet
Type: Peristaltic

Options & Prices

SS505 Discrete Stormwater Sampler, 1 Liter
Includes the following parts: a rugged, rainproof, and lockable carrying enclosure; a 1 Liter sample bottle for a first flush sample; a peristaltic sampling pump; a control panel enclosed logic regulator; a rain sensor and a water sensor (both with 15' of cable); a rechargeable 5 AH gel cell battery and battery charger; a 15' sample pickup hose with removable debris strainer; and a rain gauge that automatically drains every 24 hours.

$945

 

SMPL-LOG Water Sampler Datalogging Option
Records when the sampler triggers and total rainfall (using an optional rain gauge), and the user can download data via Palm Pilot or laptop.  Includes software and cables.  Please specify if total rainfall logging will be used.

$395

Stormwater Sampler Datalogger Option

SMPL-4TD 4-hour Adjustable Event Time Delay Option
Delay your sample for up to 4 hours from the actual trigger event.  Meet your compliance requirments without effort.

$295

 

RELATED PRODUCTS

WS300 Composite Sampler
Composite sampler with a 2.5 gallon bottle.  Refrigerated options available.

$1045

Composite Sampler

SS101 Discrete Sampler
Discrete sampler with a 2.5 gallon bottle.

$1045

Discrete Sampler

RG333   Auto Drain Rain Gauge
Free with purchase of SS505 Stormwater Sampler.

$160

Stormwater Sampler Rain Gauge

SIT60 Satellite Internet Telemetry
Replace the datalogger on your stormwater sampler with a telemetry system that pages you or alerts you via text messaging that your sampler was triggered.

$1,495

Discrete Sampler Telemetry System

SP101 Solar Panel (80mA)
Supplemental power for remote sites.
$135  
FN0000 Smart Charger
Maintain constant battery voltage and increase battery life.
$95  

REPLACEMENT PARTS

00-010   12V 5AH Rechargeable Battery.........................$  30
CA0100 Battery Cable...................................................$  20
FE0400 Battery Charger (120VAC to 12VDC)...................$  15
00-546   Pickup Hose....................................................$   1.53/ft
CA0300 Pickup Strainer................................................$  45
00-744   Peristaltic Pump Tubing....................................$   5.25/ft
00-794   1 Liter Sampling Bottle......................................$   9
CA0400 Rain Sensor.....................................................$  42
CA0500 Water Sensor...................................................$  42
CK0300 Float Switch.....................................................$  25
CH0000 Auto Drain Rain Gauge......................................$160

 
Back | Up | Next
BACK TO SITE | BACK TO ENVIRONMENTAL CATALOGUE

 

Canada Lab Instruments 2005  -  info@canadalab.com