WE900 WEATHER STATION (4-20mA)
Customizable
Weather Monitoring Station to Integrate with Recording
Systems
|
_files/image001.jpg)
|
FEATURES:
 |
Easy-to-use and economical
|
|
High quality, rugged, industrial grade sensors
for monitoring, alarming, and reporting
|
|
Wind Direction, Wind Speed, Humidity, and
Temperature Sensor electronics are fully
encapsulated in marine grade epoxy for complete
environmental protection and a long operating
life
|
|
|
On this page:
|
Downloads (PDF):
- Barometric Pressure
- Solar Radiation
- Wind Speed
- Wind Direction
- Humidity & Temperature
*May take several minutes to
download, depending on your internet connection
speed.
|
Additional Information:
- Weather Sensor
Specifications
- Satellite Internet Telemetry
- Product Support
|
|
Global Water's WE900 Weather Station is an easy-to-use
and economical weather station for monitoring many
weather conditions. The station is designed to be a
drop-in weather monitoring station for easy
integration with existing systems. The station's 4-20
mA sensors will interface with any SCADA, PLC, or RTU
system that can accept a 4-20mA input.
Designed for general meteorological applications, the
Global Water Weather Station is a rugged and low-cost
system for a variety of weather monitoring
applications, including:
|
Agriculture
|
|
Education
|
|
Environmental Studies
|
|
Landfills
|
|
Reclamation
|
|
Wastewater Facilities
|
|
Water Budget Analysis
|
|
Water Conservation
|
Included Sensors
The WE900 Global Water Weather Station includes the
following weather sensors and installation hardware:
|
WE550 Wind Speed Sensor
|
|
WE570 Wind Direction Sensor
|
|
WE700 Temperature Sensor
|
|
WE600 Humidity Sensor
|
|
WE770 Solar Shield
|
|
WE820 Mounting Frame
|
Optional Sensors
The following weather sensors and hardware can be
added to the weather station:
|
WE100 Barometric Pressure Sensor
|
|
WE300 Solar Radiation Sensor
|
|
LW100 Leaf Wetness/Rain Sensor
|
|
AT210 Soil Moisture Sensor
|
|
WL400 Water Level Sensor
|
|
EP180 Evaporation Pan
|
|
RG200 Rain Gauge 6", Tipping Bucket
|
|
RG600 Rain Gauge 8", Tipping Bucket
|
|
WE830 Mounting Tripod
|
Mounting Hardware
Global Water's Weather Station includes full assembly
on a sturdy and durable stainless steel tube frame
that can be mounted onto a pre-existing base or onto
the
WE830 Global Water Tripod for upright
installation. The unit is designed for durability and
endurance in harsh conditions. The
WE770 Solar Shield, a ventilated sun shield with
high reflectiveness, low heat retention, and low
thermo conductivity, is provided as protection for the
Temperature and Humidity sensors.
|
Proper sitting for weather sensors is important to
ensure accurate readings. For example, wind sensors
should not be installed too close to a building, as
turbulence created by the building can interfere with
readings. The Solar Radiation sensor should be
installed in direct sunlight on a level surface
(bubble level and levelling screws are included with
purchase).
Purchase of both the
Wind Direction and Wind Speed sensors includes a
T-mounting bar with a 1" stainless steel coupling unit
and allen wrench for easy allen set screw
installation. Individual wind sensors or solar
radiation sensors include 1" stainless steel elbow
couplers and an allen wrench. The Solar Shield (with
a stainless steel elbow coupler) can be used for
protection and easy installation of the Temperature
and Humidity sensors. The Barometric Pressure sensor
can be mounted with straps for a variety of
applications (including inside a datalogger or to a
display for hand-held use).
|
WE900 Weather Station
The standard
Weather Station includes the following standard
sensors and mounting accessories:
WE550 Wind Speed Sensor;
WE570 Wind Direction Sensor;
WE700 Temperature Sensor;
WE600 Humidity Sensor;
WE770 Solar Shield;
and WE820 Mounting Frame.
Unless otherwise specified, sensors will be
mounted to the WE820 Mounting Frame.
|
$1,595
|
Customize Your Weather Station
To add or replace
weather sensors and mounting hardware,
add/subtract the costs below from the WE900's
standard cost (above).
Standard
|
WE550 Wind Speed Sensor:
$415
|
|
WE570 Wind Direction Sensor: $415
|
|
WE700 Temperature Sensor:
$235
|
|
WE600 Humidity Sensor: $435
|
|
WE770 Solar Shield: $145
|
|
Optional
|
WE100 Barometric Pressure Sensor:
$375
|
|
WE300 Solar Radiation Sensor:
$555
|
|
LW100 Leaf Wetness/Rain Sensor:
$325
|
|
AT210 Soil Moisture Sensor:
$245
|
|
WL400 Water Level Sensor: $495
|
|
EP180 Evaporation Pan:
$890
|
|
RG200 Rain Gauge 6", Tipping Bucket: $160
|
|
RG600 Rain Gauge 8", Tipping Bucket: $395
|
|
WE830 Mounting Tripod: $270
|
|
|
RELATED PRODUCTS
|
|
SIT60 Satellite Internet Telemetry
|
$1,495
|
|
|
